Iron ABS Plastic Ford Mustang Ignition Coil 3L3E-12A366-CA

Ignition system ignition coil for Ford mustang 3L3E-12A366-CA

Specification

Ignition coil type

The ignition coil is divided into open magnetic type and closed magnetic type according to the magnetic circuit. The traditional ignition coil is of open magnetic type. Its iron core is made of silicon steel sheet of about 0.3mm, and the iron core is wound with secondary and primary coils. In the closed magnetic type, the primary coil is wound with an iron core similar to III, and the secondary coil is wound outside. The magnetic line of force consists of an iron core to form a closed magnetic circuit. Closed magnet ignition coil has the advantages of less magnetic leakage, small energy loss and small volume. Therefore, closed magnet ignition coil is widely used in electronic ignition system.

Precautions for use

If the ignition coil is used improperly, it will cause damage to the ignition coil. Therefore, pay attention to the following points: prevent the ignition coil from being heated or damp; Do not turn on the ignition switch when the engine is not running; Check, clean and fasten the line connector frequently to avoid short circuit or grounding; Control engine performance to prevent excessive voltage; The spark plug shall not be "hung on fire" for a long time; The moisture on the ignition coil can only be wiped dry with a cloth and must not be baked with fire, otherwise the ignition coil will be damaged.

Products picture