NEC90013A Auto Ignition Parts Roewe 550 MG6 Santa Fe 1.8 NEC000130

Auto Ignition Parts Ignition Coil NEC000130 For Roewe 550 MG6 Santa Fe 1.8

Specfication

Causes of damage to the ignition coil

1. Look at the problem of the generator first. If the power generation is too high, the ignition coil will burn out if the load is too heavy, but if the power generation is really too high, then the body electrical appliances, such as light bulbs, will often be damaged; of course not To rule out the quality of the accessories, it is best to measure the power generation first.
2. The spark plug gap is too large, adjust the gap or replace the spark plug.
3. The quality of gasoline is not good. Try changing to higher-grade gasoline.
4. The cylinder compression ratio is wrong, adjust the compression ratio.
5. If there is a program failure in the computer version, you can go to the repair shop to test the car with a computer and clear the error message. If it doesn't work, there may be a problem with your car's transmission.
6. The power supply voltage is unstable.
7. The resistance of the high voltage is abnormal, replace the high voltage line.
8. There is a short circuit phenomenon in the secondary.
9. The primary current of the ignition controller is too high, which causes the ignition coil to overheat.
10. It will not work well due to high temperature and high pressure wave.
11. It is very unlikely that the coil itself is a problem, you can try another brand.
12. The integrated block of the igniter does not work well.

Transport

EXIHIBITION

Warahouse